Wind Power

DANOBAT supplies turnkey automation solutions to WIND TURBINE manufacturers, including fabric layup, gel coating, gluing and other operations.

CONTACT US!

1 + 5 =

ADMP® HIGHLIGHTS FOR WIND TURBINE MANUFACTURERS

Features that make ADMP® disruptive in the Wind Power industry:

Part examples Shell Sparcap TE
Fabric Aereal weight (gsm) 800 1600 800
Fabric Width (mm) 800 400 200
Machine Speed (m/min) 110 110 110
“C” Rate (floor to floor) (kg/h) 450 1250 215

Accurate deposition without fabric distorsion.

In process lap/gap control and adjustment


Adaptable to any geometry needed for the manufacturing of blades: shell, sparcap, trailind and leading edges.

TYPE OF MATERIAL FABRIC TYPE DIMENSIONS
  • Glass Fabrics
  • Carbon Fabrics
  • Chopped Strand material
  • Continous filament material
  • CSM
  • CFM
  • Uniaxial
  • Biaxial
  • Triaxial
  • Combi
  • Width 100-800 mm
  • diameter <700 mm
  • Weight <600 Kg

WIND POWER APPLICATIONS

DANOBAT supplies turnkey automation solutions to its WIND POWER clients, including fabric layup, gel coating, gluing and other operations.

SHELL
line

  • Shell skin manufacturing system based on net-rolls and pattern-cut on the fly.
  • Gel coat
  • Grinding
  • Gluing

SPARCAP
line

  • Main spar manufacturing cell. Creation of the preform from net-rolls to the final shape previous to the infusion process.

TRAILING EDGE
line

  • Trailing edge preform manufcaturing automation on layup mold, from raw material to final shape.

DOWNLOADS

© 2019 DANOBAT. All rights reserved   |   Legal Notice   |   Sitemap            

error: Content is protected !!